Troubleshooting Guide to Resolve Orbi Purple Light Issue

Are you unable to make the most of your Netgear Orbi device because of the Orbi purple light issue? Have you achieved Orbi setup success via orbilogin.net but are still facing this issue? Well, that is indeed something to worry about. But, the good news is that we are here to help you to troubleshoot this issue. In this post, we have mentioned some hacks through which troubleshooting the issue at hand will become as easy as counting from one to ten. Thus, you should not waste any more time before reading this article further.

(Resolved) Netgear Orbi Purple Light Issue

Before you start troubleshooting the Netgear Orbi purple light issue, make sure that your Netgear Orbi router and the satellite are synced properly. Otherwise, you will not be able to troubleshoot the issue properly.

1. Check the Ethernet Connection

The biggest reason why you are unable to make the most of your Netgear Orbi because of the Netgear Orbi purple light issue is because of a weak Ethernet connection. You know that your Ethernet connection is weak because the cable in use is damaged.

Thus, to troubleshoot the issue, you should replace the existing cable with a new one. Although this hack will help you say goodbye to the Netgear Orbi purple light issue, in case it does not, you should divert your attention to the following hack.

2. Pull the Networking Devices Closer

We understand how much the Netgear Orbi purple light issue is troubling you. That is why you should check the distance at which the Orbi router and the existing modem are placed. If they are placed far away, it is time to bring them closer.

Too much distance between the networking devices can stop them from transmitting signals properly. Therefore, do as suggested. Also, make sure that the distance between the router and modem is not too less.

3. Avoid WiFi Interference

Another thing that can be done from your end to troubleshoot the Netgear Orbi purple light issue is to keep WiFi interference at bay. That can be done if you change the location of your Orbi wireless device.

While relocating it, devices like cordless phones, washing machines, baby monitors, treadmills, televisions, refrigerators, and microwave ovens should be kept at a safe distance from the Netgear Orbi router as well as the satellite.

4. Restart the Netgear Orbi Device

Are you still a poor victim of the Netgear Orbi purple light issue? Well, we are sorry to hear that. But, we won’t be sorry anymore as we are having high hopes that this hack will help you to troubleshoot the Netgear Orbi purple light issue.

Restarting your device is possible if you follow the below-given instructions:

• Turn off your Netgear Orbi device.
• Unplug the Orbi from its wall socket.
• Wait for some time.
• Plug the Orbi device back into its outlet.
• Turn it on.

If you want to reboot your Netgear Orbi by logging in to it, you can do that as well. Once done, try to access the Orbi setup wizard. If you are using an Orbi CBR750 device, then try to access the Orbi CBR750 setup wizard and check if the issue persists.

5. Perform Factory Default Reset

By any chance, if the issue persists, resetting your Orbi device is highly recommended. Here is how you can restore your device to the factory default settings:

• Look for the Reset button on your networking device.

• Soon, you will be able to find it.
• Thereafter, press the button.
• Hold on for as much time as required.

Once you have done Orbi factory reset, you need to set up your device right from scratch.

The Bottom Line

In order to make the most of your Netgear Orbi router, getting rid of the purple light issue is extremely important. We really hope that you will be able to get rid of the purple light issue after following the troubleshooting hacks given in this post.

To ensure that you do not face any similar issues in the future, take our advice and keep performing Orbi firmware update every time a new firmware becomes available for your Netgear Orbi device. If you are wondering from where you can take reference regarding the firmware update process, it is recommended that you pay some attention to the Netgear user manual that came along with your Orbi.

Also read:- Comprehensive Guide to Resolve Netgear Orbi Setup Issues