Most people are torn between deciding whether to choose curtains or blinds as their home window treatments, but modern decor ideas have provided another great solution to this problem. Adding further, you can pair blinds and curtains together and enjoy the benefits of both these window covering options.

For this purpose, you just need to look for a complementary pair of curtains that promise to offer an astonishing appearance when paired with blinds. And, if you’ve bought one such pair of curtains, then you must be looking for an efficient method to properly secure and install them over blinds.

Fortunately, today’s topic of discussion at Bedroom Curtains is exactly what you’re looking for i.e. a smooth installation of curtains over blinds.

The Most Efficient & Effective Way To Hang Curtains Over Blinds | A No-Drill DIY Installation Guide

No matter, if you’re an amateur or inexperienced person, following the method that we’re going to explain, will help you efficiently and smoothly install the curtains over blinds. Also, you won’t need to put a dent in the decor of your interior for this purpose i.e. no-drill curtain installation over blinds.

Before you start with the process, you need to take precise measurements of the window dimensions so as to adjust the curtain’s length and rod’s width according to the requirements. No need to mention that you should always keep the curtain rod a few inches longer than the window’s width.

Equipment Or Tools Needed For The Installation Procedure

Here’s everything you’ll need to install your curtains atop blinds:

• A Set Of Fabric Curtains
• A Curtain Rod
• A Pair of Adhesive Curtain Hooks
• Two Pair of Screws
• A Screwdriver
• A Tape Measure
• A Leveler
• A Pencil ( for marking purposes)

Installation Procedure To Follow

Below, we’ve described a step-by-step procedure for hanging curtains over blinds. Follow these steps precisely and carefully to make sure of an efficient and smooth installation procedure for curtains.

1. Install The Adhesive Curtain Hooks

Of course, the installation process will be initiated with the correct attachment or fitting of the adhesive hooks for the curtain rod. And, there are two methods of doing so i.e. via drilling a hole in the wall and by installation on the blind’s headrail.

And as mentioned above, we’re going to describe the no-drill curtain installation method to prevent a single scratch on your interior walls. In this concern, the weight-bearing strength of the hooks matters a lot and you should always consider this factor when buying adhesive hooks.

Next, you should take the help of a leveler to accurately mark the spot of the hook attachment on both sides of the window. Also, keep in mind the length of the curtains prior to marking any spots on the wall for the fitting of the hooks.

Speaking of methods to hang curtains over blinds, you should never make use of a tension rod because it will cause hindrance to the functioning of the blinds. Moving on with the installation procedure, you should position the adhesive hooks in place and tighten the screws for putting a full stop to this step of the installation.

2. Pass The Curtain Panels Through The Rod

Once you are done with the installation of the adhesive hooks or so-called command hooks, the next step is to pass the curtains through the back pocket running along the length and found at the top of the curtains.

Also, there may be no back pocket in case you’ve opted for an eyelet, grommet, or other styles of curtains to pair with blinds. Besides, if you’ve sewn the curtains yourself at home, then you will need to thread the rod through the curtains.

And, irrespective of the curtain style that you’ve chosen, one thing that should always be preferred is passing the rod through the curtains prior to hanging them. This is necessary sometimes, especially in cases, where windows are too heightened.

3. Position The Curtain Rod On The Adhesive Hooks

The third and final step in the installation procedure involves the placement of curtains on the brackets or adhesive hooks. This might seem easy but can cause problems if the curtain rod is not secured on both ends.

Adding to that, your curtains won’t offer a balanced look on the window frame (will look to be tilting in one direction) and that can diminish the aesthetics of your interior.

An uneven placement of the curtain rod might also trick you into thinking that you’ve not attached the adhesive hooks to equal lengths, however, that is not the case more often (as you’ve made use of a leveler and a pencil marker to position and screw the hooks in place).

No need to mention that if the curtain rod is not properly secured, you’ll face difficulty in opening and closing the curtains i.e. won’t be able to enjoy that smooth curtain functioning. Hence, adding all these factors up, the importance of positioning the curtain rod on the adhesive hooks increases by many folds.

EndNote

In this article, we’ve explained the most efficient method that lets you properly secure and installs curtains over blinds. All you need to do is to arrange for the required equipment and materials and make some time from your busy schedule to perform this simple DIY task.

No matter whether you want to pair curtains and blinds for aesthetics or for functional purposes, the benefits are always enchanting and will enable you to enjoy both the decorative and practical advantages of these window coverings.