How To Restore A Water Damage Carpet In 9 Steps

Water damage is one of the most common types of damage that can occur in a home. When water damage occurs, it’s important to take immediate action to mitigate further damages. Water can cause extensive damage to your carpets, furniture, and other possessions if not addressed quickly. A professional Flood Restoration Service company is best to perform Water Damage Carpet Cleaning Canberra to keep your carpet safe and clean.

In this blog post, we’ll discuss how to restore a water damaged carpet. Tips will be provided on how to remove excess water, dry the carpet, and prevent mold and mildew growth. Follow these tips to restore your water damaged carpet quickly and efficiently!

Here’s what you need to do…

Step 1

Ascertain where the flood is emanating from. Knowing this will determine pretty quickly whether your carpet is worth saving. Is it clean water from a leaking pipe, or is it dirty water caused by a sewerage back-up or a drain overflow? If your carpet appears to have direct contact from dirty water, then it’s best to remove and discard straight away. If it’s clean water, then you might want to take the actions listed below.

Step 2

Stem the source of the leak. This may be something as simple as turning off a stop-valve, or alternatively you might need to call out an emergency plumber.

Step 3

If you need to, remove any furniture you have in the room. Then if it’s safe to do so (clean water only) remove all excess water from your water damaged carpet using a series of dry cloths or towels

Step 4

Next take a box cutter and remove the portion of the carpet that contains any wet spots. While this seems like a drastic measure, carpet can easily be patched back in. What’s more it stops the possibility of mildew spreading. Remove and discard the base padding as this is more than likely to be ruined. Next elevate the carpet off the floor. Finally, open doors and windows to let air circulate the room.

Step 5

For this stage you’ll need some industrial sized fans – These can usually be hired from a good DIY store and they should be facing towards the affected area. Switch them on to high for a minimum of 24 hours but 36 hours is best. For larger properties, drying times may be longer. While drying, you’ll need to keep foot traffic to a minimum.

Step 6

It’s important to inspect your carpet after 12 hours of drying time. This is the crucial time when mould spores can take hold and therefore it’s vital to ensure the carpet is dry to the touch. If it is dry, it’s still imperative that all fans are kept running to ensure permanent drying.

Step 7

Now’s the time to get in touch with your insurance agent. On the proviso that you weren’t at fault, pull out your paperwork and give them the relevant details relating to your water damage carpet cleaning canberra, so they can at least start taking action from their end.

Step 8

Once the carpet and area is dry, make doubly sure by installing a large portable dehumidifier to eradicate any damp left in the room. It’s advisable to keep this running for a further few days.

Step 9

Once the carpet and room are completely dry, look to get your carpet patched in and replace your furniture.

Conclusion:

If you have a water damaged carpet, it is important to take action immediately. The tips in this blog post will help you get started on the path to restoring your carpet. However, if you need professional help, don’t hesitate to reach out to a flood restoration service. A professional can assess the damage and provide you with a plan for getting your carpet back to its original condition. To find out more contact us on 0480021477.