Business How do you know if a roofing contractor did a good job? Uneeb KhanNovember 28, 2022087 views You’ve had a roofing contractor come and do some work on your home, but you want to know if they did a good job. There are several different things that you can look at when checking how well roofing contractor in Baldwin Park did the work, including: Table of Contents Checking for shinglesChecking for leaks signsChecking for ice damsChecking for any missing nailsChecking for any cracks in the flashing materialChecking all of your gutters and downspoutsLook underneath the roof from inside the atticConclusion Checking for shingles You can check for shingles that were blown off in the wind by looking for missing, damaged or broken shingles. This is easier to do early in the morning or late in the evening when conditions are still. Murphy Roofing Services ensure that all areas of your roof are repaired or replaced perfectly and timely. Checking for leaks signs Check for any stains on the ceilings or walls. If you see any stains, this is a sign that there was water damage at one point in time. Look for signs of mold. Mold can be found in dark or damp areas such as corners and under sinks. If you do find mold, it’s best to have it removed professionally before it gets out of hand and causes greater damage to your home or business property. Look for signs of water damage such as peeling paint, cracking drywall which may be caused by water seeping through cracks in the roofing material. Checking for ice dams You can check for ice dams by looking at your gutters. If they’re leaking, or if icicles are hanging from the eaves of your roof, that’s a sign of an ice dam. Ice dams form when snow melts on the roof and refreezes, so it won’t melt off properly when warm weather arrives. If you see evidence of ice dams, it may mean that you need to replace your gutters so water can drain properly away from the house. Checking for any missing nails Nails should be flush with the surface of the shingle. Nails should be at least 1 inch away from the shingle ends. Nails should be spaced at least 4 inches apart, and no more than 6 inches apart.* Checking for any cracks in the flashing material You can check to see if the flashing material is cracked by looking at your roof from below. If you spot any cracks, you know that the roofer didn’t do a good job. Checking all of your gutters and downspouts The next step is to check all of your gutters and downspouts for leaks. It is also a good idea to check them for clogs and damage, as well as rust. If you notice any issues with any of these things, make sure that you bring them up with your contractor before he leaves so that they can be addressed. Look underneath the roof from inside the attic If you have access to the attic, it’s a good idea to go up there and look for any signs of leaks. You can see if any shingles or flashing material has been damaged, as well as check for missing nails. If you notice any cracks in your gutters or downspouts, you’ll know that’s an area where water may be able to sneak in through the roof. Conclusion The best way to know if a roofing contractor did a good job is by checking all of the above. If you have any doubts about whether the contractor did an adequate job or not, it’s always wise to get another opinion from someone who knows what they’re doing!