Get Rid Of Stuck Blue Light on Orbi Router

Seeing a solid blue light once the Orbi system is turned on is normal. It indicates that the connection between the Orbi router and the satellite is good. Usually, it goes off after 90-180 seconds. However, if the LED stays solid blue after that time, this means there is something wrong with your Orbi system. Are you going through a similar situation? Is the stuck Orbi blue light giving you blues? Well, fret no more. You have landed on the right post. First and foremost be assured that this is not an unusual experience. It is a common situation experienced by most Orbi users. This article is about various tips and tricks to get rid of the stuck blue light on the Orbi system. Hence, stick to reading.

Netgear Orbi Blue Light Issue: Fixed

Though the Orbi system is a high-end product delivering ultimate internet connection throughout the home, but just like every other technical device, this too becomes a victim of certain technical glitches now and then. A stuck blue light is one such issue. Let us look at some most practical fixes to resolve the problem. Here is a list of troubleshooting hacks that you need to follow for a constant blue light on your Orbi router:

1. Restart the Device:

Every time we face an issue with a technical device, our intuition says us to simply turn the device off for a couple of minutes. Here too follow your instinct. Restarting or rebooting the Orbi WiFi mesh system resolves most temporary technical hitches with it. This is a pretty simple yet effective solution for most devices. So, do this:

• Get to your Orbi WiFi mesh system.
• Turn the power supply off to the entire system.
• Wait for a while and let it rest.
• Now turn the power supply on again.

What did you notice? Is the blue light still stuck? Seems your Orbi needs some more troubleshooting. Let us proceed further then.

2. Verify Connecting Cables:

Take a look at all the cables connecting to the Orbi system. Do you find any faults in them? Maybe the cable is worn out or it is inserted in a loose manner into the device. Make sure every cable is plugged in tightly and in case the cable is damaged, get it replaced. Check if the blue light issue is resolved. If no success yet, then let us get to the next hack.

3. Update Orbi Firmware:

An obsolete firmware is the most common reason if the blue light does not disappear on your Orbi system. Get the firmware upgraded to the latest version. It is always recommended to have the latest firmware updated on your device such that you do not experience any issues with it. Simply do the Netgear Orbi login and get to the Orbi settings page and update the firmware. Here is the process:

• Make sure that your Orbi is receiving a stable power supply.
• Now using a PC, open a web browser.
• In the address bar, type orbilogin.net and hit Enter.
• The Orbi login window will display.
• Enter the admin login credentials and click on the Login button.
• Once you land on the Admin Dashboard, get to the Menu.
• Click on the Advanced option.
• Now, click on the Administration option and select the Firmware Update option.
• Further, click on Online Update option and click on Check button.
• The firmware upgrade process will begin.

This should fix the blue light issue on your Netgear Orbi. Has the issue been resolved? No? Do not worry. We still have one more troubleshooting hack that will definitely work for your case.

4. Reset Orbi:

This is the final resort if the issue does not get fixed by the previously discussed troubleshooting hacks. At times the blue light gets stuck due to some major technical issues with the device. To do away with such issues, do the Orbi factory reset and reconfigure it. To reset, press the Reset button on it. The default factory settings will be restored on it. Again, set it up with your home internet system and begin accessing its network.

We are pretty sure that by now the blue light issue has been resolved.