Home » Detailed Guide to Fix Linksys Extender Orange Light Issue

Detailed Guide to Fix Linksys Extender Orange Light Issue

by Uneeb Khan

So, the Linksys range extender blinking orange light is causing you trouble? Are you looking for the right information about why the orange light blinking is and what needs to be done to do away with it? Well, then you landed on the right post. This guide is packed with the entire Why and how questions running across your mind right now. Thus, stick to reading.

What Does Orange LED on Linksys Extender Imply?

Ideally, the LED on the Linksys range extender is green. This indicates everything is perfectly fine with the device. However, if the LED is solid orange, it indicates a weaker connection with the host router. In such a case, bringing the devices closer to each other does the job. However, for a blinking orange LED, the cases below mentioned stay true:

  • On an already set up range extender, a blinking orange light implies it is not connected to the host router.
  • If it is in the factory settings, then this implies the device is ready to be set up.

In this article, we are going to discuss in detail the blinking orange LED on the Linksys range extender and the possible troubleshooting tips for the same.

Reasons for Blinking Orange LED

Here are some common reasons that lead to a blinking orange light on the Linksys WiFi range extender.

  1. Firmware Malfunctioning

Firmware is the software embedded in the device that helps it to do the basic functionality. In order to have the Linksys range extender performing its best, it is advised to keep the firmware updated to the latest version. Do you remember the last time you updated the firmware on your Linksys device? Well, if you had not upgraded the firmware lately, then this is the possible culprit. Another possibility is if the firmware is updated, then the firmware might have been corrupted. A corrupt firmware in the device also causes the blinking orange light. The firmware can get corrupted due to various reasons. One such reason is the power interruption while updating the firmware on the device.

  1. Unstable Internet

If the Linksys range extender is not receiving a stable internet signal, then also it will have a blinking orange light.

Linksys Extender Blinking Orange LED: Fixed

Let us now get to troubleshoot the issue with your Linksys range extender. Mentioned below are some general troubleshooting hacks that will help you get rid of the blinking orange light.

  1. Ensure a Stable Internet Signal

Make sure that the Linksys range extender is receiving a reliable and high-speed internet signal. To have it ensured, here are some points to be considered:

  • The host router should be receiving a stable internet connection. In case of any issues, contact your ISP.
  • The Linksys range extender should be within the range of the host router network. Bring the devices closer if needed.
  • If there is a wired connection between the router and the extender, then check the Ethernet cable for any damages. Replace it immediately if you find it is worn out or has cuts on it.
  • The Ethernet cable should be inserted tightly into the respective ports on both the router as well as the extender.
  • Avoid placing the extender near any device or appliance that emit radio waves, as the radio waves can interfere with the extender signal. Microwave ovens, baby monitors, Bluetooth speakers, Walkie-talkies, etc. are some examples.
  • Last but not least, avoid placing the extender in a corner or enclosed area.

If these steps haven’t been able to resolve the issue, then move to the next hack.

  1. Update Firmware

If the firmware has not been updated in recent times, then consider updating your extender to the latest version of the firmware.

However, if the firmware is corrupted, then first reset the extender and then perform the Linksys range extender setup and then proceed with firmware upgrading.

Here is how you can update your Linksys range extender:

  • Download the latest version of firmware for your Linksys extender model and save it on your PC.
  • Power up your Linksys range extender.
  • Visit extender.linksys.com in a web browser to log in.
  • Enter the admin username and password.
  • Once you get to the management console, choose Firmware Upgrade under the Administration option.
  • As soon as you click on Choose File, you will be navigated to select the downloaded firmware file.
  • Select the already downloaded file on your computer and click Open.
  • Now click on Start Upgrade.
  • The firmware update process will begin.

Your Linksys range extender is running on the latest firmware version now.

Wrap Up

Here we end our article on how to resolve the blinking orange light issue on your Linksys range extender. We hope that by now the blinking orange light issue on your Linksys extender should have been fixed.

Related Posts

MarketGuest is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: [email protected]

@2024 – MarketGuest. All Right Reserved. Designed by Techager Team