Clogged Shower Heads: How to Fix Them?

Unexpected plumbing issues can be annoying and might become more stressful when you don’t know how to fix them. Clogged shower heads are no different, right? In addition to finding the cause of a clogged shower head, you may also find effective ways to fix it. Don’t know how to do it? This blog will help you find the appropriate ways to fix a clogged shower head.

Before we begin with the ways, let’s talk about how to spot a clogged shower head. Here are some signs to confirm that your shower head might be clogged:

• You’ll notice that the water pressure is low than usual
• The flow of water will become inconsistent
• You’ll find that whenever you start the shower, there’s a strange sound coming from it
• You’ll find the shower head shooting water in all directions

5 Ways to Fix Shower Heads

1. Baking Soda

Due to its use in cooking, baking, and cleaning, baking soda is a common product in almost all households. Because baking soda is naturally alkaline, blocked drain experts in Sorrento say it is one of the best natural cleaners. This characteristic makes it capable of dissolving virtually any grease, scum, and debris present in the shower head. The best thing is that it deodorises by smell molecule neutralisation as well. According to the expert Plumber in Sorrento, here’s how you use baking soda to unclog your showerhead.

Steps to follow:

• Baking soda, one tablespoon. Use your hand to dab some of it on the showerhead.
• Try to sprinkle baking soda over the entire head.
• Let it sit for  30 to 45 minutes.
• Once finished, clean the showerhead in circular strokes using an old toothbrush.
• Finally, wash with mild to hot water.

Make the showerhead slightly damp. If there is water dripping from it, this hack might not function. You may have to try other ways.

2. Vinegar

Vinegar is another significantly useful natural cleaning agent used for cleaning bathrooms. The plumbers in Sorrento say that this ingredient’s high acidity level aids in releasing the accumulated minerals. Thus, as vinegar is naturally alkaline, it can dissolve rust or scum that gets deposited in the shower head.

Steps to Follow:

• Firstly, place two cups of white vinegar in a transparent plastic bag.
• Use a rubber band to gently secure the plastic bag to your shower head, submerging the shower head in the vinegar.
• Ensure keeping the showerhead in its current position overnight,
• You’ll find that the plastic bag contains scum remnants the following morning, and the shower is clear.

3. Steel Wool and Toothpaste

According to the plumbers in Sorrento, grease or hard-to-remove dirt and dust particles can get cleaned thoroughly with steel wool or a wire sponge. The material’s fine wires aid in cleaning every hook and crevice perfectly. You’ll need a ball of fresh steel wool and any toothpaste to unclog your shower head. While toothpaste will serve as the cleaning agent, steel wool will swab everything causing the blockage.

Steps to Follow:

• Apply a generous amount of toothpaste directly to the showerhead.
• Using your hands, evenly distribute it.
• Then, using circular motions, begin using your steel wool. Use a few drops of water if the toothpaste has gotten too dry.
• Scrub the shower until it is clean.
• To unclog your shower head, you might need to repeat this procedure twice or thrice.

4. Salt and Lemon

Lemons have several positive effects. In addition to improving your health, this fruit’s high vitamin C content makes it fantastic for all types of cleaning. Lemons’ inherent acidity naturally eliminates bacteria and any bad smell in addition to rust and grease.

Steps to Follow:

• Take a large-sized lemon and split it in half.
• Start by dipping the first piece of lemon in salt and cleaning the showerhead.
• To remove anything preventing the water flow, scrub in a clockwise direction first, then attempt it counterclockwise.
• After finishing, let it sit for 30 minutes.
• With the other half, repeat the same process.
• Finally, run hot water through the showerhead to clean it.

5. Clean the Filter Screen

The filter screens are a part of the shower head area where it connects to the pipe connection. To access the filter screen of your shower head, you must detach it from the pipe. You may remove the screen from the pivot ball using tweezers or needle-nose pliers.

Run the filter screen underwater for a few minutes to rinse any accumulation after removing it from the pivot ball. You can also remove mineral deposits by carefully scrubbing them with a toothbrush.

Reinstall the shower head to the shower pipe after putting the filter screen back into the pivot ball.

Contact Experts for Better Results

Finding the right solution for fixing a clogged shower head is good, but don’t you think it’s better to let the experts handle it? The blocked drain experts in Sorrento say that hacks may work sometimes, but choosing a plumber in Sorrento can give immediate and effective results. It will also help you relax about your shower head not getting clogged in the future again. In contrast, hacks are not always guaranteed. It may work for you once, twice, or thrice but you should not ignore it if it happens back to back. So, you may try the ways but don’t forget to consult a plumber in Sorrento!

Visit: https://marketguest.com/bathroom-tilers-in-melbourne-with-9-best-tile-design-ideas/