How to resolve paint cracking with wall putty?

To give a room a breath of fresh air or enhance the aesthetics of your house, painting is the perfect solution. It is an easy way to make your home more attractive. But after a while, the painted surfaces begin to experience paint defects like blooming, cracking, chalking, and bleeding. Amongst these, the most commonly found paint defect faced by the interior and exterior surfaces of your house is paint cracking.

 This problem is generally caused by the chipping of the paint due to the cracks formed on the walls. It is often seen both on interior and exterior surfaces. But on the outer areas, paint cracking happens after long exposure to the atmosphere. Besides this, paint cracking also occurs due to insufficient drying time between coats and faulty paint application. So, how to resolve this? Wall putty can be the answer to all these wall problems. 

Reasons behind Paint Cracking

Before delving into how paint cracking can be fixed with wall putty, let’s get to know the reasons for its occurrence.  

• Paint cracking can occur if there is inadequate flexibility and adhesion in the paint. Once it happens, it doesn’t let the paint remain intact on the surface.
• It also takes place when there is a very thick layer of paint or excessive use of putty applied to the surface.
• This defect can occur if the paint is applied to a greasy surface.
• One of the primary reasons for paint cracking is the premature application of the final coat prior to the complete drying of the previous coat.
• When the paint is applied on a porous surface and there is no wall putty application before it, paint peeling can occur. Applying it is essential as it provides better adhesion, seals the surface and allows the following paint coat to perform effectively. 

Everyone dreams of having beautiful interiors and exteriors in their homes, but as they are consistently exposed to external influences like dampness, pollution, etc., they are more prone to damage. Moreover, it has been observed that paint defects generally arise due to sagging, brush marks, low coverage, etc., or taking shortcuts, and hence, they need to be resolved prior to painting. To prevent these defects from occurring, one needs to take certain precautions and repair jobs.

As discussed above, if wall putty is applied to the surface prior to painting, with its superior compressive strength and tensile adhesion, paint cracking can be prevented. Wall putty application on the walls not only makes them smooth but also ensures the paint is uniform all over the wall. If you are looking for a silky smooth surface and optimum results, wall putties from the best brands like JKCement ensure that your home stays flawless forever. Their MaxX range of wall putties, like the JKCement WallMaxX, give absolute whiteness, resistance against flaking, cracking or peeling and gives higher coverage on the walls. 

After the cracked wall or the hole formed on the wall is properly fixed, here’s what you need to do to ensure that the putty applied on the painted surface gives the best results and resolves paint cracking effectively:

• The surface of the wall should be plastered.
• Treat the surface with focus to ensure no fungus or leakage is there.
• Clean the surface thoroughly to make sure no dust, oil, or grease is present on it.
• Clean out any adhesive material on the surface with a wire brush or putty blade.
• Pre-wet the walls carefully.
• Apply the putty after the wall has dried.

Following the steps above, mix the wall putty properly to make sure that no lumps are formed and you use the mixture within 2-3 hours of preparation. After this, apply the putty to the wall and use sandpaper to smoothen the wall surface. Completing these steps will ensure that the painted surfaces of your home will not have to crack ever again!