Why is My Setek Extender Blinking Red?

Do you also have the same query – why is my WiFi extender blinking red? If yes, then you are on the right page. Look, WiFi range extenders have a number of LEDs on it. Each LED indicates different meaning. By examining how the lights behave, you may determine your Setek WiFi extender’s performance. If the LED on your WiFi range extender is blinking red, it demands some troubleshooting. Need not to worry! In this article, we will explain how to fix Setek extender blinking red light issue in a flash. Keep reading!

Reasons: Setek Extender Blinking Red

There are a number of reasons why your Setek WiFi extender is blinking red. Here is a list of some most common reasons.

No Connection between Setek Extender and Router

One of the most basic causes for Setek extender red light issue is no connection between your range extender and router.

WiFi Signal Interference

Interference from WiFi devices like baby monitors, Bluetooth speaker, electronic devices, metal objects, neighboring WiFi networks, physical obstacles, etc. can also lead to Setek WiFi extender red light issue.

Improper Power Supply

The red light issue may arise if WiFi extender socket flashing blue light. It clearly means that your range extender is receiving insuffient power supply.

Outdated Firmware

Corrupted firmware on your Setek WiFi extender can also cause the red light issue.

That’s it! These were the topmost reasons that have caused the red light issue. Now, scroll down a little and know how to deal with the trouble in discussion in a flash.

Solutions: Setek Extender Red Issue

The fixes that will help you overcome with the red light issue are right here. Head over to the next section right away.

Restart Your Setek WiFi Extender

The very first way to fix the Setek WiFi extender blinking red light issue is to power cycle or restart it. Restarting/ power cycling works like a miracle to get rid of technical glitches. For restart or power cycle the extender, simply turn it off and remove it from its respective wall socket. Wait for 5-10 minutes. Now, plug in back your range extender and turn it on. Ensure to choose a working power socket to plug it in to keep WiFi extender socket flashing blue light issue at bay. If you see damages in the wall socket, avoid plugging in your range extender. Either get the wall socket repaired or plug in the extender to a different working power socket.

Check the Power Supply

The power supply to your Setek extender must be sufficient to get rid of the red light issue. If you have power outages problem in your area, then installing a UPS would be a better option. Bear in mind, ups and downs or fluctuation in the electricity may harm your range extender rather than causing the red light issue.

Check the Connection

Connectivity issues between your Setek extender and router cause the red light issue. To prevent the red light issue, connect your Setek extender and router firmly using an Ethernet cable. Another thing that you have to take care of is the Ethernet cable. It must be well-working and and inserted in the correct ports of your router and extender.

If you don’t have an Ethernet cable, then connect your Setek extender and router using a wireless source. However, you have to keep them pretty closer and once you are done with it, press the WPS button on your range extender and then press the WPS button on your host router.

Verify Internet Connection

The internet connection must be steady while connecting your range extender and router using wireless (WPS) source. On the off chance, there is a problem with your internet connection, contact your internet service provider right away. After receiving speedy internet connection from your ISP end, try connecting your range extender and router again using WPS source.

Relocate Setek WiFi Extender

Be sure that your Setek WiFi extender is placed in an optimal location.

Where to place the Setek WiFi extender?

• It should be within range of your router
• Away from physical obstructions like thick walls, doors, and metal objects
• Also, you must avoid placing the extender closer to Baby monitor and Alexa devices

Perform Factory Reset

In the event the aforementioned troubleshooting hacks bear no result, then chances are that your Setek WiFi extender has been partially configured. So, it is time to perform a factory reset process and give your device a new start.

How to reset Setek Extender?

To reset your Setek extender, follow the steps given below:

• Firstly, disconnect your Setek WiFi extender from the host router.
• Thereafter, look for the reset button on your range extender.
• As soon as you find the reset button, press and hold it gently.
• Wait for 10 seconds and then, release the reset button.

In this way, your Setek WiFi extender resets to its default settings. Now, connect the client device to your Setek extender’s WiFi extender network and perform Setek setup process from scratch.